AGITATOR
Features
L20 Pneumatic Driven Paint Agitator
- Efficient use of compressed air
- Air Lubricant not required
- Minimal air exhaust
- Integral speed control throttle, air regulator not needed
- Integral Shaft Seal
- Incorporation of Tank Lid Seal
Paint Agitator Electric Drive
- AC Inverter control
- Variable speed range
- Integral Shaft Seal
- Incorporation of Tank Lid Seal
- Integral flinger and drain pocket to prevent possibility of gearbox oil contamination
L20 PNEUMATIC DRIVEN PAINT AGITATOR Specifications
| Part Number | 105447 0340 PADDLE - 105452 0600 PADDLE |
|---|---|
| Air Consumption (10 Cycles / min) | 28L/min 1.0 cfm |
| Speed Range | 10~30cycles/min |
| Rotation | Oscillation+/- 180° |
| Air Connection | 1/4" |
| Torque | 30 N-M / 23 Ft-Lb |
| Shaft Seal | PTFE |
| Recommended Compressed Air / Supply Pressure | 0.5 MPa |
PAINT AGITATOR ELECTRIC DRIVE Specifications
| Part Number | 106974-1 (AC Inverter) |
|---|---|
| Speed Range | 106974-1 Paddle speed 47 - 190 RPM 1 |
| Electric Motor | 400V, 0.4kW |
| Shaft Seal | PTFE |
| Mounting Boss | Ø160 with 4 – holes Ø9 on 140 PCD |
