RAgent Mark-012
-90kV High voltage electrostatic coating Superior transfer efficiency
The electrostatic coating voltage is a high voltage of -90kV, the high voltage generator (cascade) is built-in making a high voltage cable unecessary, and on top of this, because the design allows only the cascade unit to be removed from the unit for replacement, safety has been increased and maintenance made easier to perform.
Features
- Improved efficiency
The high performance cascade built in to the body boosts the applied voltage, which affects transfer efficiency, to -90kV.
The wrap-around effect (the effect where charged paint wraps around the painted object, coating it right around to the reverse side) which is a feature of electrostatic coating, is maximized, resulting in superior paint transfer efficiency and contributing to less paint waste. - Improved safety
By combing the new spray gun with an HV Controller (RPI model) that is equipped with various safety detectors such as an Absolute sensitivity detection function (OL), a di/dt sensitivity detection function (SL), a constant voltage cable disconnection detection function (WT), and an HV transformer over-current detection function (OC), a more stabilized finishing quality is achieved and electrostatic coating safety is enhanced. - Easier to maintain
Because the unit is constucted so that the 3 way valve or trigger/dump valves are attached directly to the spray gun's body, and because the high voltage generator (cascade) can be removed and replaced, maintenance has been made much easier. - Various Nozzles
Various nozzles are avaialble.
You can select the fluid nozzle and air caps which meet your requirements. - Independent control of Atomizing/Pattern Air
Atomizing air and pattern air can be independently controlled.
This enables high quality finishing which is best suited for the job at hand.
-90kV High voltage electrostatic coating Superior transfer efficiency
RAgent Mark-012 Systematic Sketch
Greatly reduced coating cost
| Workpiece | Efficiency of RAgent Mark-012 (compared to air spray gun) |
|---|---|
| Automobile parts | About 30% saving |
| Aluminum sash | About 35% saving |
| Steel locker | About 40% saving |
Specifications
| Type | RRAGENT Mk4 |
|---|---|
| Length | 420mm |
| Weight | 2.8 kg (including 3 way valve) |
| Impressed voltage | DC-30 ～ -90kV |
| Maximum paint delivery (Recommendation) | 300mL/min |
| Air Consumption | Atomization air 100 ～ 250L/min Pattern air 100 ～ 250L/min |
| Tubing size | Atomization air 10 × 8mm Pattern air 10 × 8mm Paint 6 × 4mm (Standard) |
| Air/Fluid nozzle | Conventional and new nozzles are available |
| Cascade | Input voltage DC 3 to 23 V (15 to 20 kHz) Output voltage -30 to -90 kV |
| Environment condition | Ambient temperature 0 to 45°C Relative humidity 25 to 85%RH (no condensation) |
