T-AGB
Compact Automatic Spray Gun
The T-AGB gun is a compact automatic gun utilizing the DeVilbiss air cap known as the high performance and high quality. (Length 92mm, weight 270g - 570g)
It can also be used as a paint circulating system inside the gun which is suited for quickly settling paint.
Applications
- It can be attached to all types of automatic painting machines, but it is especially suited for measurably restricted areas.
- It can also be used with painting robots. (It can also easily handle switching the pattern width and changes with the flow rate within one program)
Features
- Gun Body
Select from either aluminum or stainless steel for the gun body, and in addition, all metal parts can be changed to stainless steel or high corrosion resistant stainless steel for special application. - Fluid tips
Fluid tip is made of stainless steel as a standard but it is also available with nitralloy and tungsten carbide. - Needles
The standard material for the needle is stainless steel but it is also available with abrasion proof tungsten carbide. - How to Use
The T-AGB gun does not have an air valve mechanism inside the gun, so it can be used as an air bleeder type or please pay attention to on/off timing of air and fluid.
*Please set the cylinder air (CYL) pressure to 3.5kgf/cm² or higher.
Specifications
| Air caps | Parts number | Typical Applications | Features |
|---|---|---|---|
| 62 | MB-4039-62 | Maintenance painting / Enamels | For high flow rates |
| 64 | MB-4039-64 | Enamels / high viscous liquid | Low and medium pressure type |
| 67 | MB-4039-67 | Enamels | High pressure type |
| 110 | AV-242-110 | Marking / Small spots | For round pattern |
| 265 | AV-1239-265R | Automotives / Metallics | Finest atomization |
| 704 | AV-1239-704 | Electronics / Fine finish furniture and wood / Enamels | Medium pressure type |
| 705 | AV-1239-705 | Hot spray / Fine finishing | Low pressure type |
| 765 | AV-1239-765 | Automotives / Fine finishing | Finest atomization |
| 777 | 31767-777 | Automotives / Metallics | Finest atomization |
| 797 | AV-1239-797 | Automotives / Metallics / Adhesives | Finest atomization |
| Air Cap No. | Air consumption and Air inlet pressure L/min(MPa / kgf/m²) |
Spray Pattern (Distance18cm) |
Combination fluid tips |
||
|---|---|---|---|---|---|
| 62 | 302(0.21/2.1) | 367(0.27/2.8) | 440(0.34/3.5) | 18 ～ 22 | AC |
| 64 | 314(0.21/2.1) | 386(0.27/2.8) | 459(0.34/3.5) | 30 ～ 36 | D |
| 67 | 462(0.34/3.5) | 532(0.41/4.2) | 608(0.48/4.9) | 25 ～ 30 | EE |
| 110 | 95(0.21/2.1) | 118(0.27/2.8) | 137(0.34/3.5) | - | FX,G |
| 265 | 483(0.34/3.5) | 577(0.41/4.2) | 636(0.48/4.9) | 23 ～ 36 | E,FF,FX,G |
| 704 | 283(0.21/2.1) | 347(0.27/2.8) | 414(0.34/3.5) | 18 ～ 23 | E,FF,FX,G |
| 705 | 202(0.14/1.4) | 230(0.21/2.1) | 258(0.27/2.8) | 18 ～ 23 | FF,FX,G |
| 765 | 412(0.34/3.5) | 540(0.48/4.9) | 666(0.62/6.3) | 23 ～ 36 | E,FF,FX,G |
| 777 | 483(0.34/3.5) | 577(0.41/4.2) | 636(0.48/4.9) | 23 ～ 36 | E,FF,FX |
| 797 | 493(0.34/3.5) | 580(0.41/4.2) | 664(0.48/4.9) | 23 ～ 36 | E,FF,FX,G |
Air Cap, Fluid Tip Selection
| Applications | Code | Fluid tip size (mm) | Parts number | ||
|---|---|---|---|---|---|
| General material and for corrosive liquid | Nitralloy | Tungsten carbide | |||
| For corrosive liquid | Abrasive material | Enamels | |||
| Low flow rate | G | 0.7 | AV-651-G | ||
| For finishing | FX | 1.1 | AV-651-FX | ||
| For finishing | FF | 1.4 | AV-651-FF | AV-611-FF | AV-617-FF |
| For high speed work / maintenance paint | E | 1.8 | AV-651-E | AV-611-DE | AV-617-DE |
| For maintenance paint / Enamels | D | 2.2 | AV-651-D | AV-611-D | AV-617-D |
| Maintenance paint / High viscous liquid / Enamels | AC | 2.8 | AV-611-AC | AV-617-AC | |
| Fluid tip size (mm) | Parts number (Needles) | |
|---|---|---|
| Stainless Steel | Tungsten carbide | |
| 0.7 | T-JGA-402-G | |
| 1.1 | T-JGA-402-FZ | |
| 1.4 | T-JGA-402-FZ | T-JGA-409-FF |
| 1.8 | T-JGA-402-E | T-JGA-409-EE |
| 2.2 | T-JGA-402-DEX | T-JGA-409-D |
| 2.8 | T-JGA-409-AC | |
