RAgent Mark 2
Internal Pressure / Air Atomization-type Electrostatic Coating Equipment
Featuring best suited to various shaped workpiece and more than 75% high transfer efficiency obtainable by point high voltage of -90 kV
- Atomizing air and pattern air being controlled independently, high quality finishing is realizable even with various shaped workpiece.
- The spiral paint tube in the gun body eliminates the necessity to insulate the paint supply system even when a low content metallic paint is used.
- Various nozzles made available for selection to meet the paint and different shaped workpiece.
- Built-in high voltage power supply (cascade) eliminates high voltage cable and improves the safety.
- Easy maintenance and cleaning by simply removing the rear cover.
Features
- Metallic Coating
The spiral paint tube in the gun body eliminated the necessity to insulate the paint supply syatem even when a low content metallic paint is used. - Easy Maintenance Coating
The rear cover can be easily removed.
Cleaning is very easy. - Various Nozzles
Various nozzles are available.
Select a paint nozzle and an air nozzle which meet your requirements. - Independent control of Atomizaing / Pattern Air
Atomizing air and pattern air can be indepently controlled.
This enables high quality finishing which is best suited to work.
Ragent Mark 2 Systematic Sketch
Greatly reduced coating cost
| Workpiece | Efficiency of RAgent Mark 2 (compared to air spray gun) |
|---|---|
| Automobile parts | About 30% saving |
| Aluminum sash | About 35% saving |
| Steel locker | About 40% saving |
Specifications
| Model | AEHL90F2 |
|---|---|
| Total length | Approx. 390mm |
| Weight | Approx. 2.4kg (Excluding low voltage cable) |
| Impressed Voltage | Max. DC-90kV |
| Maximum paint delivery (Recommendation) | 300mℓ/min |
| Air Consumption | Atomization air 100 ～ 250L/min Pattern air 100 ～ 250L/min |
| Tubing size | Atomizing air 10 × 8mm Pattern air 10 × 8mm Paint 6 × 4mm (Standard)(Conductive paint type : RM-5M) |
| Air/Paint nozzle | Conventional and new nozzles are available. |
| Cascade | Input Voltage DC3 to 23V(15 to 20kHz) Output voltage -30 to -90kV |
| Environmental Conditions | Ambient temperature 0 to 45°C Relative humidity 25 to 85%RH (No dew condensation should be present) |
