Infinity Diaphragm Pumps
1/2" Diaphragm Pump
1" Diaphragm Pump
1-1/2" Diaphragm Pump
Binks infinity diaphragm pumps have made large volume delivery possible and they are highly durable.
Ideal for abrasive coatings, high solids and shear sensitive paints. Highly reliable as the paint supply for HVLP and LVMP, and also the perfect option for a tight budget.The pump will not be damaged even when you have run out of the paints. Infinity diaphragm pumps can be used widely from just one gun to large volume supply using multiple guns.
Features
- Ideal for handling abrasive liquids and liquids containing hard particles
Binks pumps are not use rotating or sliding seals, so many process engineers are considering using them when handling such liquids. In case the pump is run dry, the damage can be minimized. - "Unbalanced" air valve makes it “not stop” even when air pressure is low. Due to its unique design, this valve does not stop in the middle when the pump is stopped.
- Solved the pump stop problem. Move with significantly less air pressure than competitors.
- Lubrication oil is not required. Even air that is somewhat dirty can be used.
- Easy start with fully self-priming. The liquid check valve in the pump is located near the diaphragm pump chamber and reliably starts self-priming. Runs immediately when the pump is dry condition.
- The air motor valve is designed to apply a constant air pressure to the induction valve and the main shift valve, thus further performance improvement and pulsation reduction have been achieved.
- Stainless steel seats applied for all pumps and stainless steel or PTFE balls are equipped depending on your applications.
Material list
| No. | Body | Sheet | Ball | Diaphragm |
|---|---|---|---|---|
| 818830 | Stainless | Stainless | Stainless | PTFE |
| 818831 | Conductive acetal | Stainless | Stainless | PTFE |
| 818823 | Stainless | Stainless | Stainless | PTFE |
Specifications
| Product No. | 818830 (Stainless) 818831 (Conductive acetal) |
818823 (Stainless) | 818810 (Stainless) |
|---|---|---|---|
| Outlet size | 1/2" | 1" | 1-1/2" |
| Pressure ratio | 1:1 | 1:1 | 1:1 |
| Air inlet pressure | 0.1-0.69MPa | 0.14-0.83MPa | 0.1-0.83MPa |
| Hydrostatic pressure | 0.1-0.69MPa | 0.14-0.83MPa | 0.1-0.83MPa |
| Max.delivery (Stainless steel) | 49L/min | 132L/min | 340L/min |
| Max.delivery (Conductive acetal) | 49L/min | - | - |
| Inhalable particle size | 2.4mm | 3.2mm | 6.4mm |
| Working temperature (Stainless) | 5-82℃ | 5-66℃ | 5-66℃ |
| Working temperature (Conductive acetal) | 5-82℃ | - | - |
| Flow rate per cycle (Stainless) | 0.15L | 0.60L | 2.76L |
| Flow rate per cycle (Conductive acetal) | 0.083L | - | - |
| Noise bell (with muffler) @60Cyc/Min | 71.1dB(A) | 64.5dB(A) | 77.7dB(A) |
| Air motor | Unbalance | Unbalance | Unbalance |
| Diaphragm material | PTFE | PTFE | PTFE |
| Sheet | 316 Stainless | Stainless | Stainless |
| Ball (Standard) | 316 Stainless | Stainless | Stainless |
| Weight (Stainless) | 6.6kg | 16.3kg | 38.1kg |
| Weight (Conductive acetal) | 4.0kg | - | - |
Accessories
| Product No. | 818830 (Stainless) 818831 (Conductive acetal) |
818823 (Stainless) | 818810 (Stainless) |
|---|---|---|---|
| Air control | 849303 | 849303 | 849303 |
| Wall bracket | 873116 | 873115 | 873134 |
| Suction hose | 1.5m hose with strainer | 1.5m hose with strainer | - |
| for 20L | 874504 | 874500 | - |
| for 200L | - | 874501 | - |
